Jonsered CS 2240 Manuel d'utilisateur télécharger pdf (Page 30)

English – 31

7.10 Centrifugal clutch – reﬁtting

Insert the clutch springs in the shoes.

Screw the clutch (anti-clockwise) until it stops.

Now tighten using tool 502 54 16-03 and a suitable

socket wrench or combination spanner. Tightening

torque min. 20 Nm.

Remove the piston stop. Fit the spark plug, tightening

it to a torque of 20 Nm, then connect the HT lead.

Then ret:

• cylinder cover

• guide bar

• chain

• clutch cover

7.11 Dismantling the oil pump and

screen

Empty and clean the oil tank.

Remove the cylinder cover. Release the brake by

moving the front hand guard backward. Undo the

bar nut and remove the clutch cover, bar and chain.

Loosen spark plug cap and remove the spark plug,

t the piston stop 502 54 15-01. Loosen the clutch

(clockwise) using tool 502 54 16-03 and a suitable

socket wrench or combination spanner.

Remove the centrifugal clutch (A). Remove the

clutch drum (B), needle bearing (C) and pump

drive wheel (D) (see gure 17).

Unscrew the chain guide plate (see gure 18).

Unbolt the oil pump from the crankcase and

remove it together with the oil pressure hose (see

gure 19).

The oil pump (E) is not adjustable (see gure 20).

Cleaning and inspection

• Clean and inspect all parts carefully. If there are

any cracks or other defects replace the dama-

ged parts with new ones. Always use original

parts.

• Lubricate all moving parts with chain oil.

Repair instructions

Fig 17

Fig 18

Fig 19

Fig 20

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 54 55

Commentaires sur ces manuels

Pas de commentaire

Jonsered CS 2240 Manuel d'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à chaîne Jonsered CS 2240